PVC 防静电地板

产品特性：
产品表面电阻效率10⁵-10⁹Ω，施工方便快捷，易于清洗维护。

适应范围：
生产中有防静电要求的电子、微电子、元器件、通讯设备、生产厂家、SMT邦定车间等。

Product characteristics:
Anti-static floor at surface resistance 10⁵-10⁹Ω,easy to use,easy to wash.

Applications:
Manufacturers electronic,microelectronies,electronic Component com industries in which they need anti-static environment,plus SMTfactory

防潮处理，素地配合条件及使用保养注意事项：
1、地面须经水泥粉或整体粉光、表面要求坚硬、平整、不得有脱层松动现象；
2、粉光面力求平整、并有适当排水坡度或排水沟（根据需要）；
3、防蚀地面与洁净场所之地面与墙面交接处要做水泥砂浆圆弧，其半径至少5公分；
4、新水泥面需经过四周以上的养护，施工前表面要经过充分干燥，含水量在8%以下或是使用透明胶布覆盖，以胶带粘贴地水泥地，待8小时后，检视胶布内如无水气结露现象即可施工；
5、有重物拦击或锐利物刮之区域须安置橡胶板等保护；
6、搬动车要用橡胶轮胎；
7、灰尘或物料用吸尘器清除即可；
8、油渍或污垢用去渍油或清洁剂擦洗；
9、地板受损可做局面修补；

PREVENTION OF MOISTURE, FLOOR COND DONS AND UEAGE PLUS REPAIR AND MAINTEN
1、Ground should be polished partialy or wholly,surface required to be hard,smooth and craking
2、polishing surface should be smooth and has built in drainage system
3、Cement grit are is needed for the connection walls be-tween the corrosive and cleaning areas,The radius should be at least 5cm.
4、New cement should be prepared at least 4 weeks in advance before commence of work,Cement must be dry ,moisture content should be less than 8% or the cement should be covered by plastic sheet that is sturck to cement surface.Inspection of moisture content is car-ried out after 8 hours dryness.
5、The impact area or area easily to be scratched shoued be protected by rubber sheets
6、Use rubber tires for transportation
7、Use vacuum cleaner for dust or materials cleaning
8、Use cleaning agents to clean the dirt or grease
9、Partial repair can be done if the floor is damaged.

防静电智能网络OA地板

主要技术指标：
表面电阻：10⁵-10⁸Ω
系统接地电阻：10⁶-10⁹Ω
磨擦起电：<100v
静载荷：≥1000kg/m²
磨耗量：0.02g/m²/1000转
半衰期：<1.0S

Feature:
Suface resistance:10⁵-10⁸Ω
system resistance:10⁶-10⁹Ω
statico Electricatian Voltage:<100v
uniform loael:≥1000kg/m²
wear ability:0.02g/m²/1000转
half life：<1.0S

适用范围:
防静电智能网络系列地板广泛用于电子计算机机访，微波通信站机房，程控电话交换机机房，卫星地面站机房，电台控制室，电视发射台控制室，集成电路生产洁净车间，电子仪器厂装配车间，精密光学仪器制造车间，医院手术室，5A智能大厦及其它管线辅设比较集中和防尘静电的场所。

Applications:
The product can be used in a variety of places,such as compluter rooms, microwave computer cation stations,progranning control exchange machine rooms,satellite eartth workshops of electronic instrument factories,manufacturing worshops for precise optical instrument,operation room,5A Intelligent Buiding and anaesthetic centralized and dust-proof and antistatic features are demanded.